Effective motor cooling due to discharge channel cast as part of the motor housing,allowed to
run at low water level for a long time.
Semi-open impeller made of high chrome alloy.
The pump can operate automatically with built-in intelligent control system,thus achieve low total energy costs.
Application
Civil engineering
Mines,quarries,coal ore&slurries
Sewage treatment plants
General pumping purposes
Pumping fluid:sludge,liquids-containing mud and/or bentonite
Any inquiry,please email to sophia@astoncommodity.com
Specification
Capacity:up to 150m/h
Head:up to 50 meters
Power:1.5kW(2HP)to 11 kW(15HP)
Power supply:three phase 400V+10%,50Hz 380V±10%,60Hz
Insulation class:F
Protection class:IP68
Water temperature:up to 40
Max.water depth:25m
Special features on request
Other voltages
Main advantages
Any inquiry,please email to sophia@astoncommodity.com
Protect against reverse phase,ensuring correct impeller rotation;
Protect against open phase or impeller jam,thus prevent accidental damage;
Automatically stop the pump in event of overload,abnormal voltage and recovery 5 mins later;
The pump stop working at high temperature,and will automatically restart after cooling to the specified
temperature;
The water sensor's height is adjustable to control pump operation and stop;
The pump stops working within 60s when water level is below the probe,and the pump starts operating
again when the water level rises to contact the electric probe;
Rapid assessment about the pump operation and malfunction history.
Any inquiry,please email to sophia@astoncommodity.com
Advantages:
1.F-class insulated motor
2.wide voltage and heavy duty design
3.extrusion-resistant reinforced cable
4.water blocking,sealed cable entrance
5.water proof and leakage-proof thermal protector against lost phase,jam and overload
6.high pressure rated sic mechanical seal
7.wear-resistance high chrome alloy impeller,harder than HRC55.
Any inquiry,please email to sophia@astoncommodity.com
